Marble Tiled Kitchen and Hallway Cleaned and Polished in Edinburgh

Details below of a Marble Tiled floor installed in the hallway and kitchen of a house in Edinburgh. The tiles were in good physical shape but had lost their polished appearance over time resulting in a dull un-appealing finish. This is not unusual for polished stone especially in high traffic areas such as hallways and kitchens.

Cleaning Marble Floor Tile and Grout

Our first job was to give the floor a general clean to remove grime and dirt especially along the grout lines. This was done by applying a strong dilution of Tile Doctor Pro-Clean which is left to dwell on the floor before being scrubbed in, Pro-Clean is an alkaline cleaner so it’s safe to use on tile and stone unlike acidic cleaners which can damage the surface of the stone over time. The now dirty cleaning solution was removed using a wet vacuum and the floor given a rinse using water.

Marble Tiled Floor Polishing

The next step was to burnish the Marble which is a process that removes ingrained dirt and brings up the polish on the tile. The process involves the application of four diamond pads in sequence; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

When the Burnishing process was completed Tile doctor Shine powder which is a crystallising powder is worked into the floor using a bonnet machine fitted with a buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish.

 

Cleaning and Polishing a Marble Tiled floor in Edinburgh