This dull and un-inviting Victorian tiled entrance hall was located at a house in the small town of Whitburn in West Lothian which is half between Glasgow and Edinburgh. The tiles were in need of a deep clean and seal and we do see our fair share of Victorian tiled floors in this area and so have become quite experienced in their maintenance.
Cleaning Victorian Tile and Grout
To clean the floor and remove any remaining sealer a strong dilution of Tile Doctor Pro-Clean was applied to the floor and left to soak into the tiles for around fifteen minutes before being worked into the tile and grout using a black scrubbing pad fitted to a rotary bonnet machine. Pro-Clean is a heavy duty alkaline cleaning product that un-like acid based cleaners are safe to use on Tile, Stone and Grout.
The soiled cleaning solution was then rinsed off using water and then the whole process repeated; three times to ensure any remaining sealer was removed and the floor was clean. The final step was to neutralise the floor before sealing which we did by giving it a final wash with Tile Doctor Neutral Tile Cleaner, this time we extracted as much water as possible using a wet vacuum and then left the tile to dry off overnight.
Sealing Victorian Tiles
We came back the next day and after checking the floor was clean and dry proceeded to seal the tiles using five coats of Tile Doctor Seal and Go. Seal and Go is a water based sealer so it doesn’t leave a smell as its drying, it also offers good stain protection and adds a nice sheen to the floor.
The entrance tiles now look new again and the sealer should keep it that way for a long time to come.